[Code of Federal Regulations]
[Title 40, Volume 30]
[Revised as of July 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1039.630]

[Page 517]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1039_CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD 
COMPRESSION-IGNITION ENGINES--Table of Contents
 
                 Subpart G_Special Compliance Provisions
 
Sec. 1039.630  What are the economic hardship provisions for equipment 
manufacturers?

    If you qualify for the economic hardship provisions specified in 40 
CFR 1068.255, we may approve your hardship application subject to the 
following additional conditions:
    (a) You must show that you have used up the allowances to produce 
equipment with exempted engines under Sec. 1039.625.
    (b) You may produce equipment under this section for up to 12 months 
total (or 24 months total for small-volume manufacturers).