[Code of Federal Regulations]
[Title 40, Volume 30]
[Revised as of July 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1048.10]

[Page 545]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1048_CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION 
ENGINES--Table of Contents
 
              Subpart A_Determining How to Follow This Part
 
Sec. 1048.10  What main steps must I take to comply with this part?

    (a) You must have a certificate of conformity from us for each 
engine family before you do any of the following with a new nonroad 
engine covered by this part: sell, offer for sale, introduce into 
commerce, distribute or deliver for introduction into commerce, or 
import it into the United States. ``New'' engines may include some 
already placed in service (see the definition of ``new nonroad engine'' 
and ``new nonroad equipment'' in Sec. 1048.801). You must get a new 
certificate of conformity for each new model year.
    (b) To get a certificate of conformity and comply with its terms, 
you must do six things:
    (1) Meet the emission standards and other requirements in subpart B 
of this part.
    (2) Perform preproduction emission tests.
    (3) Apply for certification (see subpart C of this part).
    (4) Do routine emission testing on production engines as required by 
subpart D of this part.
    (5) Do emission testing on in-use engines, as we direct under 
subpart E of this part.
    (6) Follow our instructions throughout this part.
    (c) Subpart F of this part describes how to test your engines 
(including references to other parts).
    (d) Subpart G of this part and 40 CFR part 1068 describe 
requirements and prohibitions that apply to engine manufacturers, 
equipment manufacturers, owners, operators, rebuilders, and all others.