[Code of Federal Regulations]
[Title 40, Volume 30]
[Revised as of July 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1048.20]

[Page 545-546]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1048_CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION 
ENGINES--Table of Contents
 
              Subpart A_Determining How to Follow This Part
 
Sec. 1048.20  What requirements from this part apply to my excluded 
engines?

    (a) Engine manufacturers producing an engine excluded under Sec. 
1048.5(d) must add a permanent label or tag identifying each engine. 
This applies equally to importers. To meet labeling requirements, you 
must do the following things:
    (1) Attach the label or tag in one piece so no one can remove it 
without destroying or defacing it.
    (2) Make sure it is durable and readable for the engine's entire 
life.
    (3) Secure it to a part of the engine needed for normal operation 
and not normally requiring replacement.
    (4) Write it in block letters in English.
    (5) Instruct equipment manufacturers that they must place a 
duplicate label as described in 40 CFR 1068.105 if they obscure the 
engine's label.
    (b) Engine labels or tags required under this section must have the 
following information:
    (1) Include the heading ``Emission Control Information''.

[[Page 546]]

    (2) Include your full corporate name and trademark.
    (3) State the engine displacement (in liters) and maximum brake 
power.
    (4) State: ``THIS ENGINE IS EXCLUDED FROM THE REQUIREMENTS OF 40 CFR 
PART 1048 AS A ``STATIONARY ENGINE.'' INSTALLING OR USING THIS ENGINE IN 
ANY OTHER APPLICATION MAY BE A VIOLATION OF FEDERAL LAW SUBJECT TO CIVIL 
PENALTY.''.