[Code of Federal Regulations]
[Title 40, Volume 30]
[Revised as of July 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1048.420]

[Page 568]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1048_CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION 
ENGINES--Table of Contents
 
                    Subpart E_Testing In-use Engines
 
Sec. 1048.420  What in-use testing information must I report to EPA?

    (a) In a report to us within three months after you finish testing 
an engine family, do all the following:
    (1) Identify the engine family, model, serial number, and date of 
manufacture.
    (2) For each engine inspected or considered for testing, identify 
whether the diagnostic system was functioning.
    (3) Describe the specific reasons for disqualifying any engines for 
not being properly maintained or used.
    (4) For each engine selected for testing, include the following 
information:
    (i) Estimate the hours each engine was used before testing.
    (ii) Describe all maintenance, adjustments, modifications, and 
repairs to each test engine.
    (5) State the date and time of each test attempt.
    (6) Include the results of all emission testing, including 
incomplete or invalidated tests, if any.
    (b) Send electronic reports of in-use testing to the Designated 
Officer using an approved information format. If you want to use a 
different format, send us a written request with justification for a 
waiver.
    (c) We will send copies of your reports to anyone from the public 
who asks for them. See Sec. 1048.815 for information on how we treat 
information you consider confidential.
    (d) We may ask for more information.