[Code of Federal Regulations]
[Title 42, Volume 1]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 42CFR84.31]

[Page 513]
 
                         TITLE 42--PUBLIC HEALTH
 
    CHAPTER I--PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN 
                                SERVICES
 
PART 84_APPROVAL OF RESPIRATORY PROTECTIVE DEVICES--Table of Contents
 
                   Subpart D_Approval and Disapproval
 
Sec. 84.31  Certificates of approval; contents.

    (a) The certificate of approval shall contain a classification and a 
description of the respirator or combination of respirators for which it 
is issued, as provided in this part.
    (b) The certificate of approval shall specifically set forth any 
restrictions or limitations on the respirator's use in hazardous 
atmospheres.
    (c) Each certificate of approval shall be accompanied by the 
drawings and specifications (and lists thereof) submitted by the 
applicant in accordance with Sec. 84.11. These drawings and 
specifications shall be referenced in the certificate of approval, and 
shall be maintained by the applicant. The drawings and specifications 
listed in each certificate of approval shall set forth in detail the 
design and construction requirements which shall be met by the applicant 
during commercial production of the respirator.
    (d) Each certificate of approval shall be accompanied by a 
reproduction of the approval label design to be employed by the 
applicant with each approved respirator, as provided in Sec. 84.33.
    (e) No test data or specific laboratory findings will accompany any 
certificate of approval, however, the Institute will release pertinent 
test data and specific findings upon written request by the applicant, 
or as required by statute or regulation.
    (f) Each certificate of approval shall also contain the approved 
quality control plan as specified in Sec. 84.42.