[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR50.10-25]

[Page 112-113]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 50_GENERAL PROVISIONS--Table of Contents
 
        Subpart 50.10_Definition of Terms Used in This Subchapter
 
Sec. 50.10-25  Coast Guard Symbol.

    (a) The term Coast Guard Symbol means that impression stamped on the 
nameplates of boilers, pressure vessels, and safety valves by a marine 
inspector upon the satisfactory completion of the tests and inspection 
of the product. It may also be used by a marine inspector to identify 
workmanship test plates and welding samples.
    (b) The impression of the Coast Guard Symbol for stamping nameplates 
and specimens is shown in Figure 50.10-25(b).

[[Page 113]]

[GRAPHIC] [TIFF OMITTED] TC01FE91.018

                 Figure 50.10-25(b)--Coast Guard Symbol