[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR50.20-1]

[Page 113-114]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 50_GENERAL PROVISIONS--Table of Contents
 
                Subpart 50.20_Plan Submittal and Approval
 
Sec. 50.20-1  General.


    (a) The required vessel, equipment, or installation plans, as listed 
in this subchapter, are general in character, but include all plans 
which normally show the intended construction and safety features coming 
under the cognizance of the Coast Guard. In a particular

[[Page 114]]

case, however, not all of the plans enumerated may be applicable, and in 
such cases the Coast Guard will so notify the submitter.
    (b) Manufacturers of pressure vessels and other components, which 
require specific fabrication inspection in accordance with the 
requirements of this subchapter, shall submit and obtain approval of the 
applicable construction plans prior to the commencement of such 
fabrication. Manufacturers of automatically controlled boilers shall 
submit and obtain approval of the applicable control system plans prior 
to installation of the boiler. Manufacturers of boilers which must meet 
the requirements of part 52 of this subchapter shall submit the 
applicable construction plans for review prior to installation.

[CGFR 68-82, 33 FR 18808, Dec. 18, 1968, as amended by CGD 81-79, 50 FR 
9431, Mar. 8, 1985]