[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR50.25-3]

[Page 116]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 50_GENERAL PROVISIONS--Table of Contents
 
       Subpart 50.25_Acceptance of Material and Piping Components
 
Sec. 50.25-3  Manufacturer or mill certification.

    (a) A manufacturer or mill producing materials used in certain 
products for installation on inspected vessels, shall issue a 
certificate or mill test report which shall report the results of 
chemical analysis and mechanical properties required by the ASTM 
specification.
    (b) This certificate shall be made available to the marine inspector 
and Officer in Charge, Marine Inspection, upon request to the 
fabricator. (For exception refer to Sec. 50.25-5(d).)

[CGFR 68-82, 33 FR 18808, Dec. 18, 1968, as amended by CGD 77-140, 54 FR 
40598, Oct. 2, 1989]