[Code of Federal Regulations] [Title 46, Volume 2] [Revised as of October 1, 2004] From the U.S. Government Printing Office via GPO Access [CITE: 46CFR52.01-1] [Page 118-119] TITLE 46--SHIPPING CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PART 52_POWER BOILERS--Table of Contents Subpart 52.01_General Requirements Sec. 52.01-1 Incorporation by reference. Subpart 52.01_General Requirements Sec. 52.01-1 Incorporation by reference. 52.01-2 Adoption of section I of the ASME Code. 52.01-3 Definitions of terms used in this part. 52.01-5 Plans. 52.01-10 Automatic controls. 52.01-35 Auxiliary, donkey, fired thermal fluid heater, and heating boilers. 52.01-40 Materials and workmanship. 52.01-50 Fusible plugs (modifies A-19 through A-21). 52.01-55 Increase in maximum allowable working pressure. 52.01-90 Materials (modifies PG-5 through PG-13). 52.01-95 Design (modifies PG-16 through PG-31 and PG-100). 52.01-100 Openings and compensation (modifies PG-32 through PG-39, PG-42 through PG-55). 52.01-105 Piping, valves and fittings (modifies PG-58 and PG-59). 52.01-110 Water-level indicators, water columns, gauge-glass connections, gauge cocks, and pressure gauges (modifies PG- 60). 52.01-115 Feedwater supply (modifies PG-61). 52.01-120 Safety valves and safety relief valves (modifies PG-67 through PG-73). 52.01-130 Installation. 52.01-135 Inspection and tests (modifies PG-90 through PG-100). 52.01-140 Certification by stamping (modifies PG-104 through PG-113). 52.01-145 Manufacturers' data report forms (modifies PG-112 and PG-113). Subpart 52.05_Requirements for Boilers Fabricated by Welding 52.05-1 General (modifies PW-1 through PW-54). 52.05-15 Heat treatment (modifies PW-10). 52.05-20 Radiographic and ultrasonic examination (modifies PW-11 and PW- 41.1). 52.05-30 Minimum requirements for attachment welds (modifies PW-16). 52.05-45 Circumferential joints in pipes, tubes and headers (modifies PW-41). Subpart 52.15_Requirements for Watertube Boilers 52.15-1 General (modifies PWT-1 through PWT-15). 52.15-5 Tube connections (modifies PWT-9 and PWT-11). Subpart 52.20_Requirements for Firetube Boilers 52.20-1 General (modifies PFT-1 through PFT-49). 52.20-17 Opening between boiler and safety valve (modifies PFT-44). 52.20-25 Setting (modifies PFT-46). [[Page 119]] Subpart 52.25_Other Boiler Types 52.25-1 General. 52.25-3 Feedwater heaters (modifies PFH-1). 52.25-5 Miniature boiler (modifies PMB-1 through PMB-21). 52.25-7 Electric boilers (modifies PEB-1 through PEB-19). 52.25-10 Organic fluid vaporizer generators (modifies PVG-1 through PVG- 12). 52.25-15 Fired thermal fluid heaters. 52.25-20 Exhaust gas boilers. Authority: 46 U.S.C. 3306, 3307, 3703; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; Department of Homeland Security Delegation No. 0170.1. Source: CGFR 68-82, 33 FR 18815, Dec. 18, 1968, unless otherwise noted. (a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a). To enforce any edition other than that specified in paragraph (b) of this section, the Coast Guard must publish notice of change in the Federal Register and make the material available to the public. All approved material is on file at the U.S. Coast Guard, Office of Design and Engineering Standards (G-MSE), 2100 Second Street SW., Washington, DC 20593-0001 and is available from the sources indicated in paragraph (b) of this section or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/ federal--register/code--of--federal--regulations/ibr--locations.html. (b) The material approved for incorporation by reference in this part and the sections affected are: American Society of Mechanical Engineers (ASME) International Three Park Avenue, New York, NY 10016--5990 Boiler and Pressure Vessel Code, Section I, Power Boilers, July 1989 with 1989 addenda........52.01-2; 52.01-5; 52.01-50; 52.01-90; 52.01-95; 52.01-100; 52.01-105; 52.01-110; 52.01-115; 52.01-120; 52.01- 135; 52.01-140; 52.01-145; 52.05-1; 52.05-15; 52.05-20; 52.05- 30; 52.05-45; 52.15-1; 52.15-5; 52.20-1; 52.20-17; 52.20-25; 52.25-3; 52.25-5; 52.25-7; 52.25-10 [CGD 88-032, 56 FR 35821, July 29, 1991, as amended by CGD 95-072, 60 FR 50462, Sept. 29, 1995; CGD 96-041, 61 FR 50727, Sept. 27, 1996; USCG- 1999-6216, 64 FR 53224, Oct. 1, 1999]