[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR52.01-2]

[Page 119-120]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 52_POWER BOILERS--Table of Contents
 
                   Subpart 52.01_General Requirements
 
Sec. 52.01-2  Adoption of section I of the ASME Code.

    (a) Main power boilers and auxiliary boilers shall be designed, 
constructed, inspected, tested, and stamped in accordance with section I 
of the ASME (American Society of Mechanical Engineers) Code, as limited, 
modified, or replaced by specific requirements in this part. The 
provisions in the appendix to section I of the ASME Code are adopted and 
shall be followed when the requirements in section I make them 
mandatory. For general information Table 52.01-1(a) lists the various 
paragraphs in section I of the ASME Code which are limited, modified, or 
replaced by regulations in this part.

   Table 52.01-1(a)--Limitations and Modifications in the Adoption of
                       Section I of the ASME Code
------------------------------------------------------------------------
Paragraphs in section I, ASME Code\1\ and
               disposition                       Unit of this part
------------------------------------------------------------------------
PG-1 replaced by.........................  54.01-5(a)
PG-5 through PG-13 modified by...........  52.01-90
PG-16 through PG-31 modified by..........  52.01-95
PG-32 through PG-39 modified by..........  52.01-100
PG-42 through PG-55 modified by..........  52.01-100
PG-58 and PG-59 modified by..............  52.01-105
PG-60 modified by........................  52.01-110
PG-61 modified by........................  52.01-115
                                           (56.50-30)
PG-67 through PG-73 modified by..........  52.01-120
PG-90 through PG-100 modified by.........  52.01-135
                                           (52.01-95)
PG-91 modified by........................  52.01-135(b)
PG-99 modified by........................  52.01-135(c)
PG-100 modified by.......................  52.01-95(e)
PG-104 through PG-113 modified by........  52.01-140(a)
PG-112 and PG-113 modified by............  52.01-145
PW-1 through PW-54 modified by...........  52.05-1
PW-10 modified by........................  52.05-15
PW-11.1 modified by......................  52.05-20
PW-16 modified by........................  52.05-30
PW-41 modified by........................  52.05-20, 52.05-45
PWT-1 through PWT-15 modified by.........  52.15-1
PWT-9 modified by........................  52.15-5
PWT-9.2 replaced by......................  52.15-5(b)
PWT-11 modified by.......................  52.15-5
PWT-11.3 replaced by.....................  52.15-5(b)
PFT-1 through PFT-49 modified by.........  52.20-1
PFT-44 modified by.......................  52.20-17
PFT-46. modified by......................  52.20-25
PFH-1 modified by........................  52.25-3
PMB-1 through PMB-21 modified by.........  52.25-5
PEB-1 through PEB-19 modified by.........  52.25-7
PVG-1 through PVG-12 modified by.........  52.25-10

[[Page 120]]


A-19 through A-21 modified by............  52.01-50
------------------------------------------------------------------------
\1\ The references to specific provisions in the ASME Code are coded.
  The first letter ``P'' refers to section I, while the letter ``A''
  refers to the appendix to section I. The letter or letters following
  ``P'' refer to a specific subsection of section I. The number
  following the letter or letters refers to the paragraph so numbered in
  the text.

    (b) References to the ASME Code, such as paragraph PG-1, indicate:

P=Section I, Power Boilers ASME Code.
G=Subsection--General.
1=Paragraph 1.

    (c) When a section or paragraph of the regulations in this part 
relates to material in section I of the ASME Code, the relationship with 
the code will be shown immediately following the heading of the section 
or at the beginning of the paragraph as follows:
    (1) (Modifies P ------.) This indicates that the material in P ----
-- is generally applicable but is being altered, amplified or augmented.
    (2) (Replaces P ------.) This indicates that P ------ does not 
apply.
    (3) (Reproduces P ------.) This indicates that P ------ is being 
identically reproduced for convenience, not for emphasis.

[CGFR 68-82, 33 FR 18815, Dec. 18, 1968, as amended by CGFR 69-127, 35 
FR 9975, June 17, 1970; CGD 81-79, 50 FR 9431, Mar. 8, 1985. 
Redesignated and amended by CGD 88-032, 56 FR 35821, July 29, 1991]