[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR53.10-3]

[Page 138]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 53_HEATING BOILERS--Table of Contents
 
  Subpart 53.10_Tests, Inspection, Stamping, and Reporting (Article 5)
 
Sec. 53.10-3  Inspection and tests (modifies HG-500 through HG-540).

    (a) The inspections required by HG-500 through HG-540 must be 
performed by the ``Authorized Inspector'' as defined in HG-575 of the 
ASME Code. The Authorized Inspector shall hold a valid commission issued 
by the National Board of Boiler and Pressure Vessel Inspectors. After 
installation, heating boilers must be inspected for compliance with this 
part by a marine inspector.
    (b) Automatically controlled boilers must be subjected to the 
operating tests prescribed in part 63 of this subchapter.
    (c) All heating boilers must have the operation of their pressure 
relieving devices checked after the final installation.

[CGD 81-79, 50 FR 9436, Mar. 8, 1985]