[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR54.10-25]

[Page 156]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 54_PRESSURE VESSELS--Table of Contents
 
             Subpart 54.10_Inspection, Reports, and Stamping
 
Sec. 54.10-25  Manufacturers' data report forms (modifies UG-120).

    (a) The Manufacturers' data report form, as provided by the Coast 
Guard, shall be completed in duplicate and certified by the manufacturer 
for each pressure vessel required to be shop inspected under these 
regulations. The original of this form shall be delivered to the Coast 
Guard inspector.
    (b) Data forms for those parts of a pressure vessel requiring 
inspection, which are furnished by other than the shop of the 
manufacturer responsible for the completed unit, shall be executed in 
triplicate by the manufacturer of the parts. The original and one copy 
shall be delivered to the Coast Guard inspector who shall forward one 
copy of the report to the Officer in Charge, Marine Inspection, having 
cognizance over the final assembly. These partial data reports, together 
with the final inspection and tests, shall be the final Coast Guard 
inspector's authority to apply the Coast Guard symbol and number. A 
final data report shall be executed by the manufacturer or assembler who 
completes the final assembly and tests.
    (c) If a pressure vessel is required to be inspected in accordance 
with Sec. 54.10-3(c), the manufacturer's data reports required by UG-
120 must be made available to the Coast Guard inspector for review prior 
to inspection of the pressure vessel.

(Approved by the Office of Management and Budget under control number 
2130-0181)

[CGFR 69-127, 35 FR 9977, June 17, 1970 as amended by CGD 77-147, 47 FR 
21810, May 20, 1982]