[Code of Federal Regulations] [Title 46, Volume 2] [Revised as of October 1, 2004] From the U.S. Government Printing Office via GPO Access [CITE: 46CFR58.01-1] [Page 253-254] TITLE 46--SHIPPING CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PART 58_MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS--Table of Contents Subpart 58.01_General Requirements Sec. 58.01-1 Scope. Subpart 58.01_General Requirements Sec. 58.01-1 Scope. 58.01-5 Applicable standards. 58.01-10 Fuel oil. 58.01-20 Machinery guards. 58.01-25 Means of stopping machinery. 58.01-30 Trial-trip observance. 58.01-35 Main propulsion auxiliary machinery. 58.01-40 Machinery, angles of inclination. 58.01-45 Machinery space, ventilation. 58.01-50 Machinery space, noise. 58.01-55 Tanks for flammable and combustible oil. Subpart 58.03_Incorporation of Standards 58.03-1 Incorporation by reference. Subpart 58.05_Main Propulsion Machinery 58.05-1 Material, design and construction. 58.05-5 Astern power. 58.05-10 Automatic shut-off. Subpart 58.10_Internal Combustion Engine Installations 58.10-5 Gasoline engine installations. 58.10-10 Diesel engine installations. 58.10-15 Gas turbine installations. Subpart 58.16_Liquefied Petroleum Gases for Cooking and Heating 58.16-1 Scope. 58.16-5 Definition. 58.16-7 Use of liquefied petroleum gas. 58.16-10 Approvals. 58.16-15 Valves and safety relief devices. 58.16-16 Reducing regulators. 58.16-17 Piping and fittings. 58.16-18 Installation. 58.16-19 Tests. 58.16-20 Ventilation of compartments containing gas-consuming appliances. 58.16-25 Odorization. 58.16-30 Operating instructions. 58.16-35 Markings. Subpart 58.20_Refrigeration Machinery 58.20-1 Scope. 58.20-5 Design. 58.20-10 Pressure relieving devices. 58.20-15 Installation of refrigerating machinery. 58.20-20 Refrigeration piping. 58.20-25 Tests. Subpart 58.25_Steering Gear 58.25-1 Applicability. 58.25-5 General. 58.25-10 Main and auxiliary steering gear. 58.25-15 Voice communications. 58.25-20 Piping for steering gear. 58.25-25 Indicating and alarm systems. 58.25-30 Automatic restart. 58.25-35 Helm arrangements. 58.25-40 Arrangement of the steering-gear compartment. 58.25-45 Buffers. 58.25-50 Rudder stops. 58.25-55 Overcurrent protection for steering-gear systems. 58.25-60 Non-duplicated hydraulic rudder actuators. 58.25-65 Feeder circuits. 58.25-70 Steering-gear control systems. 58.25-75 Materials. 58.25-80 Automatic pilots and ancillary steering gear. 58.25-85 Special requirements for tank vessels. Subpart 58.30_Fluid Power and Control Systems 58.30-1 Scope. 58.30-5 Design requirements. 58.30-10 Hydraulic fluid. 58.30-15 Pipe, tubing, valves, fittings, pumps, and motors. 58.30-20 Fluid power hose and fittings. 58.30-25 Accumulators. 58.30-30 Fluid power cylinders. [[Page 254]] 58.30-35 Testing. 58.30-40 Plans. 58.30-50 Requirements for miscellaneous fluid power and control systems. Subpart 58.50_Independent Fuel Tanks 58.50-1 General requirements. 58.50-5 Gasoline fuel tanks. 58.50-10 Diesel fuel tanks. 58.50-15 Alternate material for construction of independent fuel tanks. Subpart 58.60_Industrial Systems and Components on Mobile Offshore Drilling Units (MODU) 58.60-1 Applicability. 58.60-2 Alternatives and substitutions. 58.60-3 Pressure vessel. 58.60-5 Industrial systems: Locations. 58.60-7 Industrial systems: Piping. 58.60-9 Industrial systems: Design. 58.60-11 Analyses, plans, diagrams and specifications: Submission. 58.60-13 Inspection. Authority: 43 U.S.C. 1333; 46 U.S.C. 3306, 3703; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; Department of Homeland Security Delegation No. 0170.1. Source: CGFR 68-82, 33 FR 18878, Dec. 18, 1968, unless otherwise noted. The regulations in this part contain requirements for the design and construction of main and auxiliary machinery installed on vessels.