[Code of Federal Regulations] [Title 46, Volume 2] [Revised as of October 1, 2004] From the U.S. Government Printing Office via GPO Access [CITE: 46CFR58.03-1] [Page 256-257] TITLE 46--SHIPPING CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PART 58_MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS--Table of Contents Subpart 58.03_Incorporation of Standards Sec. 58.03-1 Incorporation by reference. (a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a). To enforce any edition other than that specified in paragraph (b) of this section, the Coast Guard must publish notice of change in the Federal Register and make the material available to the public. All approved material is on file at the U.S. Coast Guard, Office of Design and Engineering Standards (G-MSE), 2100 Second Street SW., Washington, DC 20593-0001 and is available from the sources indicated in paragraph (b) of this section or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/ federal--register/code--of--federal--regulations/ibr--locations.html. (b) The material approved for incorporation by reference in this part and the sections affected are: American Boat and Yacht Council (ABYC) 3069 Solomons Island Road, Edgewater, MD 21037 P-1-73, Safe Installation of Exhaust Systems for Propulsion and Auxiliary Machinery, 1973........................................58.10-5 American Bureau of Shipping (ABS) ABS Plaza, 16855 Northchase Drive, Houston, TX 77060 Rules for Building and Classing Steel Vessels, 1989....58.01-5; 58.05-1; 58.10-15; 58.20-5; 58.25-5 American National Standards Institute (ANSI) 11 West 42nd Street, New York, NY 10036 ANSI B31.3, Chemical Plant and Petroleum Refinery Piping, 1987...58.60-7 ANSI B31.5, Refrigeration Piping, 1987.................58.20-5; 58.20-20 ANSI B93.5, Recommended practice for the use of Fire Resistant Fluids for Fluid Power Systems, 1979...................................58.30-10 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005--4070. API RP 14C, Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms, 1986...........58.60-9 API RP 53, Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells, 1984.........................................58.60-7 [[Page 257]] American Society of Mechanical Engineers (ASME) International Three Park Avenue, New York, NY 10016--5990. Boiler and Pressure Vessel Code, Section I, Power Boilers, July 1989 with 1989 addenda...........58.30-15 Section VIII, Division 1, Pressure Vessels, July 1989 with 1989 addenda 58.30-15 American Society for Testing and Materials (ASTM) 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. ASTM A 193/A 193M-98a, Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 58.30-15 ASTM B 96-93, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels 58.50-5 ASTM B 122/B 122M-95, Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar..............................58.50-5 ASTM B 152-97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar...................................................58.50-5 ASTM B 209-96, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate........................................58.50-5; 58.50-10 ASTM D 92-97, Standard Test Method for Flash and Fire Points by Cleveland Open Cup..............................................58.30-10 ASTM D 93-97, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester...............................................58.01-10 ASTM D 323-94, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)...........................................58.16-5 International Maritime Organization (IMO) Publications Section, 4 Albert Embankment, London SE1 7SR, United Kingdom A.467(XII), Guidelines for Acceptance of Non-Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight, 1981--58.25- 60 A.468(XII), Code on Noise Levels on Board Ships, 1981--58.01-50 Military Specifications (MIL-SPEC) Naval Publication and Forms Center, Code 1052, 5801 Tabor Avenue, Philadelphia, PA 19120 MIL-S-901, Requirements for High Impact Shock Tests of Shipboard Machinery Equipment and Systems, 1963...........................58.30-17 National Fire Protection Association (NFPA) 1 Batterymarch Park, Quincy, MA 02269 NFPA 302, Fire Protection Standard for Pleasure and Commercial Craft, 1989.............................................................58.10-5 Society of Automotive Engineers (SAE) 400 Commonwealth Drive, Warrendale, PA 15096 SAE J-1928, Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications, 1989.............................58.10-5 Underwriters Laboratories, Inc. (UL) 12 Laboratory Drive, Research Triangle Park, NC 27709 UL 1111, Marine Carburetor Flame Arresters, 1988.................58.10-5 [CGD 88-032, 56 FR 35823, July 29, 1991, as amended by CGD 83-043, 60 FR 24776, May 10, 1995; CGD 95-012, 60 FR 48050, Sept. 18, 1995; CGD 95- 072, 60 FR 50462, Sept. 29, 1995; CGD 96-041, 61 FR 50728, Sept. 27, 1996; CGD 97-057, 62 FR 51044, Sept. 30, 1997; USCG-1999-6216, 64 FR 53224, Oct. 1, 1999; USCG-1999-5151, 64 FR 67180, Dec. 1, 1999; USCG- 2000-7790, 65 FR 58460, Sept. 29, 2000]