[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR58.25-60]

[Page 270]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 58_MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS--Table of Contents
 
                       Subpart 58.25_Steering Gear
 
Sec. 58.25-60  Non-duplicated hydraulic rudder actuators.

    Non-duplicated hydraulic rudder actuators may be installed in the 
steering-gear control systems on each vessel of less than 100,000 
deadweight tons. These actuators must meet IMO Assembly Resolution 
A.467(XII), Guidelines for Acceptance of Non-Duplicated Rudder Actuators 
for Tankers, Chemical Tankers, and Gas Carriers of 10,000 Tons Gross 
Tonnage and Above But Less Than 100,000 Tonnes Deadweight, 1981, and be 
acceptable to the Commanding Officer, Marine Safety Center. Also, the 
piping for the main gear must comply with Sec. 58.25-10(e)(3).