[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR59.10-30]

[Page 284]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 59_REPAIRS TO BOILERS, PRESSURE VESSELS AND APPURTENANCES--Table of Contents
 
Subpart 59.10_Welding Repairs to Boilers and Pressure Vessels in Service
 
Sec. 59.10-30  Seal welding.

    Where leaks occur in riveted joints or connections, they shall be 
carefully investigated to determine the cause. Such leaks may be made 
tight by seal welding the edge, if, in the opinion of the Officer in 
Charge, Marine Inspection, this will make a satisfactory repair.