[Code of Federal Regulations]
[Title 46, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR61.03-1]

[Page 287-288]
 
                           TITLE 46--SHIPPING
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 61_PERIODIC TESTS AND INSPECTIONS--Table of Contents
 
                Subpart 61.03_Incorporation of Standards
 
Sec. 61.03-1  Incorporation by reference.


    (a) Certain material is incorporated by reference into this part 
with the approval of the Director of the Federal Register under 5 U.S.C. 
552(a) and 1 CFR part 51. To enforce any edition other than that 
specified in paragraph (b) of this section, the Coast Guard must publish 
a notice of change in the Federal Register and the material must be 
available to the public. All approved material is available for 
inspection at the U.S. Coast Guard, Office of Design and Engineering 
Standards (G-MSE), 2100 Second Street SW., Washington, DC 20593--0001 
and is available from the sources indicated in paragraph (b) of this 
section or at the National Archives and Records Administration (NARA). 
For information on the availability of this material at NARA, call 202-
741-6030, or go to: http://www.archives.gov/federal--register/code--of--
federal--regulations/ibr--locations.html.
    (b) The material approved for incorporation by reference in this 
part and the sections affected are as follows:


[[Page 288]]



            American Society for Testing and Materials (ASTM)

100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D 665-98, Standard Test Method for Rust-Preventing Characteristics 
of Inhibited Mineral Oil in the Presence of Water...............61.20-17

[CGD 95-027, 61 FR 26001, May 23, 1996, as amended by CGD 96-041, 61 FR 
50728, Sept. 27, 1996; 97-057, 62 FR 51044, Sept. 30, 1997; USCG-1999-
6216, 64 FR 53225, Oct. 1, 1999; USCG-1999-5151, 64 FR 67180, Dec. 1, 
1999]