[Code of Federal Regulations]
[Title 49, Volume 2]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR179.200-3]

[Page 1034]
 
                        TITLE 49--TRANSPORTATION
 
 CHAPTER I--RESEARCH AND SPECIAL PROGRAMS ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 179_SPECIFICATIONS FOR TANK CARS--Table of Contents
 
 Subpart D_Specifications for Non-Pressure Tank Car Tanks (Classes DOT-
                            111AW and 115AW)
 
Sec. 179.200-3  Type.

    Tank built under these specifications must be circular in cross 
section, with formed heads designed convex outward. When specified in 
Sec. 179.201-1, the tank must have at least one manway or one expansion 
dome with manway, and such other external projections as are prescribed 
herein. When the tank is divided into compartments, each compartment 
must be treated as a separate tank.

[Amdt. 179-10, 36 FR 21348, Nov. 6, 1971]