[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR215.117]

[Page 177]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 215_RAILROAD FREIGHT CAR SAFETY STANDARDS--Table of Contents
 
                    Subpart B_Freight Car Components
 
Sec. 215.117  Defective roller bearing adapter.

    A railroad may not place or continue in service a car, if the car 
has a roller bearing adapter that is--
    (a) Cracked or broken;
    (b) Not in its design position; or
    (c) Worn on the crown of the adapter to the extent that the frame 
bears on the relief portion of the adapter, as shown in the figure below 
(see figure 1).