[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR229.89]

[Page 355]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 229_RAILROAD LOCOMOTIVE SAFETY STANDARDS--Table of Contents
 
                      Subpart C_Safety Requirements
 
Sec. 229.89  Jumpers; cable connections.

    (a) Jumpers and cable connections between locomotives shall be so 
located and guarded to provide sufficient vertical clearance. They may 
not hang with one end free.
    (b) Cable and jumper connections between locomotive may not have any 
of the following conditions:
    (1) Broken or badly chafed insulation.
    (2) Broken plugs, receptacles or terminals.
    (3) Broken or protruding strands of wire.