[Code of Federal Regulations]
[Title 19, Volume 1]
[Revised as of April 1, 2005]
From the U.S. Government Printing Office via GPO Access
[CITE: 19CFR10.58]

[Page 119]
 
                        TITLE 19--CUSTOMS DUTIES
 
   CHAPTER I--BUREAU OF CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF 
              HOMELAND SECURITY; DEPARTMENT OF THE TREASURY
 
PART 10_ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC.
--Table of Contents
 
                      Subpart A_General Provisions
 
Sec. 10.58  Bolting cloths; marking.

    (a) As a prerequisite to the free entry of bolting cloth for milling 
purposes under subheading 5911.20.20, Harmonized Tariff Schedule of the 
United States, the cloth shall be indelibly marked from selvage to 
selvage at intervals of not more then 10.16 centimeters with ``bolting 
cloth expressly for milling purposes'' in block letters 7.62 centimeters 
in height. Bolting cloths composed of silk imported expressly for 
milling purposes shall be considered only such cloths as are suitable 
for and are used in the act or process of grading, screening, bolting, 
separating, classifying, or sifting dry materials, or dry materials 
mixed with water, if the water is merely a carrying medium.
    (b) Bolting cloths not marked in the manner above indicated at the 
time of importation may be so marked by the importers in public stores 
under the supervision of customs officers.

[28 FR 14663, Dec. 31, 1963, as amended by T.D. 87-75, 52 FR 20066, May 
29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]

            Withdrawal of Supplies and Equipment for Vessels