[Code of Federal Regulations] [Title 21, Volume 1] [Revised as of April 1, 2005] From the U.S. Government Printing Office via GPO Access [CITE: 21CFR1304.22] [Page 59-61] TITLE 21-FOOD AND DRUGS CHAPTER II--DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE PART 1304_RECORDS AND REPORTS OF REGISTRANTS--Table of Contents Sec. 1304.22 Records for manufacturers, distributors, dispensers, researchers, importers and exporters. Each person registered or authorized (by Sec. 1301.13(e) or Sec. Sec. 1307.11-1307.13 of this chapter) to manufacture, distribute, dispense, import, export or conduct research with controlled substances shall maintain records with the information listed below. (a) Records for manufacturers. Each person registered or authorized to manufacture controlled substances shall maintain records with the following information: (1) For each controlled substance in bulk form to be used in, or capable of use in, or being used in, the manufacture of the same or other controlled or noncontrolled substances in finished form, (i) The name of the substance; (ii) The quantity manufactured in bulk form by the registrant, including the date, quantity and batch or other identifying number of each batch manufactured; (iii) The quantity received from other persons, including the date and quantity of each receipt and the name, address, and registration number of the other person from whom the substance was received; (iv) The quantity imported directly by the registrant (under a registration as an importer) for use in manufacture by him/her, including the date, quantity, and import permit or declaration number for each importation; (v) The quantity used to manufacture the same substance in finished form, including: (A) The date and batch or other identifying number of each manufacture; (B) The quantity used in the manufacture; (C) The finished form (e.g., 10-milligram tablets or 10-milligram concentration per fluid ounce or milliliter); (D) The number of units of finished form manufactured; (E) The quantity used in quality control; (F) The quantity lost during manufacturing and the causes therefore, if known; (G) The total quantity of the substance contained in the finished form; (H) The theoretical and actual yields; and (I) Such other information as is necessary to account for all controlled substances used in the manufacturing process; (vi) The quantity used to manufacture other controlled and noncontrolled substances, including the name of each substance manufactured and the information required in paragraph (a)(1)(v) of this section; (vii) The quantity distributed in bulk form to other persons, including the date and quantity of each distribution and the name, address, and registration number of each person to whom a distribution was made; (viii) The quantity exported directly by the registrant (under a registration as an exporter), including the date, quantity, and export permit or declaration number of each exportation; (ix) The quantity distributed or disposed of in any other manner by the registrant (e.g., by distribution of complimentary samples or by destruction), including the date and manner of distribution or disposal, the name, address, and registration number of the person to whom distributed, and the quantity distributed or disposed; and (x) The originals of all written certifications of available procurement quotas submitted by other persons (as required by Sec. 1303.12(f) of this chapter) relating to each order requiring the distribution of a basic class of controlled substance listed in Schedule I or II. (2) For each controlled substance in finished form, (i) The name of the substance; (ii) Each finished form (e.g., 10-milligram tablet or 10-milligram concentration per fluid ounce or milliliter) and the number of units or volume of finished form in each commercial container (e.g., 100-tablet bottle or 3-milliliter vial); (iii) The number of containers of each such commercial finished form [[Page 60]] manufactured from bulk form by the registrant, including the information required pursuant to paragraph (a)(1)(v) of this section; (iv) The number of units of finished forms and/or commercial containers acquired from other persons, including the date of and number of units and/or commercial containers in each acquisition to inventory and the name, address, and registration number of the person from whom the units were acquired; (v) The number of units of finished forms and/or commercial containers imported directly by the person (under a registration or authorization to import), including the date of, the number of units and/or commercial containers in, and the import permit or declaration number for, each importation; (vi) The number of units and/or commercial containers manufactured by the registrant from units in finished form received from others or imported, including: (A) The date and batch or other identifying number of each manufacture; (B) The operation performed (e.g., repackaging or relabeling); (C) The number of units of finished form used in the manufacture, the number manufactured and the number lost during manufacture, with the causes for such losses, if known; and (D) Such other information as is necessary to account for all controlled substances used in the manufacturing process; (vii) The number of commercial containers distributed to other persons, including the date of and number of containers in each reduction from inventory, and the name, address, and registration number of the person to whom the containers were distributed; (viii) The number of commercial containers exported directly by the registrant (under a registration as an exporter), including the date, number of containers and export permit or declaration number for each exportation; and (ix) The number of units of finished forms and/or commercial containers distributed or disposed of in any other manner by the registrant (e.g., by distribution of complimentary samples or by destruction), including the date and manner of distribution or disposal, the name, address, and registration number of the person to whom distributed, and the quantity in finished form distributed or disposed. (b) Records for distributors. Except as provided in paragraph (e) of this section, each person registered or authorized to distribute controlled substances shall maintain records with the same information required of manufacturers pursuant to paragraphs (a)(2)(i), (ii), (iv), (v), (vii), (viii) and (ix) of this section. (c) Records for dispensers and researchers. Each person registered or authorized to dispense or conduct research with controlled substances shall maintain records with the same information required of manufacturers pursuant to paragraph (a)(2)(i), (ii), (iv), (vii), and (ix) of this section. In addition, records shall be maintained of the number of units or volume of such finished form dispensed, including the name and address of the person to whom it was dispensed, the date of dispensing, the number of units or volume dispensed, and the written or typewritten name or initials of the individual who dispensed or administered the substance on behalf of the dispenser. In addition to the requirements of this paragraph, practitioners dispensing gamma- hydroxybutyric acid under a prescription must also comply with Sec. 1304.26. (d) Records for importers and exporters. Each person registered or authorized to import or export controlled substances shall maintain records with the same information required of manufacturers pursuant to paragraphs (a)(2) (i), (iv), (v) and (vii) of this section. In addition, the quantity disposed of in any other manner by the registrant (except quantities used in manufacturing by an importer under a registration as a manufacturer), which quantities are to be recorded pursuant to paragraphs (a)(1) (iv) and (v) of this section; and the quantity (or number of units or volume in finished form) exported, including the date, quantity (or number of units or volume), and the export permit or declaration number for each exportation, but excluding all quantities (and number of units and volumes) manufactured by an exporter under a [[Page 61]] registration as a manufacturer, which quantities (and numbers of units and volumes) are to be recorded pursuant to paragraphs (a)(1)(xiii) or (a)(2)(xiii) of this section. (e) Records for reverse distributors. Each person registered to distribute controlled substances as a reverse distributor shall maintain records with the following information for each controlled substance: (1) For each controlled substance in bulk form the following: (i) The name of the controlled substance. (ii) The total quantity of the controlled substance to the nearest metric unit weight consistent with unit size. (iii) The quantity received from other persons, including the date and quantity of each receipt and the name, address, and registration number of the other person from whom the controlled substance was received. (iv) The quantity returned to the original manufacturer of the controlled substance or the manufacturer's agent, including the date of and quantity of each distribution and the name, address and registration number of the manufacturer or manufacturer's agent to whom the controlled substance was distributed. (v) The quantity disposed of including the date and manner of disposal and the signatures of two responsible employees of the registrant who witnessed the disposal. (2) For each controlled substance in finished form the following: (i) The name of the substance. (ii) Each finished form (e.g., 10-milligram tablet or 10-milligram concentration per fluid ounce or milliliter) and the number of units or volume of finished form in each commercial container (e.g., 100-tablet bottle or 3-milliliter vial). (iii) The number of commercial containers of each such finished form received from other persons, including the date of and number of containers in each receipt and the name, address, and registration number of the person from whom the containers were received. (iv) The number of commercial containers of each such finished form distributed back to the original manufacturer of the substance or the manufacturer's agent, including the date of and number of containers in each distribution and the name, address, and registration number of the manufacturer or manufacturer's agent to whom the containers were distributed. (v) The number of units or volume of finished forms and/or commercial containers disposed of including the date and manner of disposal, the quantity of the substance in finished form disposed, and the signatures of two responsible employees of the registrant who witnessed the disposal. [62 FR 13960, Mar. 24, 1997, as amended at 68 FR 41229, July 11, 2003; 70 FR 293, Jan. 4, 2005]