[Code of Federal Regulations]
[Title 14, Volume 2]
[Revised as of January 1, 2005]
From the U.S. Government Printing Office via GPO Access
[CITE: 14CFR125.73]

[Page 649-650]
 
                     TITLE 14--AERONAUTICS AND SPACE
 
CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION 
                               (CONTINUED)
 
PART 125_CERTIFICATION AND OPERATIONS: AIRPLANES HAVING A SEATING 
 
                      Subpart C_Manual Requirements
 
Sec. 125.73  Contents.

    Each manual shall have the date of the last revision and revision 
number on each revised page. The manual must include--
    (a) The name of each management person who is authorized to act for 
the certificate holder, the person's assigned area of responsibility, 
and the person's duties, responsibilities, and authority;
    (b) Procedures for ensuring compliance with airplane weight and 
balance limitations;
    (c) Copies of the certificate holder's operations specifications or 
appropriate extracted information, including area of operations 
authorized, category and class of airplane authorized, crew complements, 
and types of operations authorized;
    (d) Procedures for complying with accident notification 
requirements;
    (e) Procedures for ensuring that the pilot in command knows that 
required airworthiness inspections have been made and that the airplane 
has been approved for return to service in compliance with applicable 
maintenance requirements;
    (f) Procedures for reporting and recording mechanical irregularities 
that come to the attention of the pilot in command before, during, and 
after completion of a flight;

[[Page 650]]

    (g) Procedures to be followed by the pilot in command for 
determining that mechanical irregularities or defects reported for 
previous flights have been corrected or that correction has been 
deferred;
    (h) Procedures to be followed by the pilot in command to obtain 
maintenance, preventive maintenance, and servicing of the airplane at a 
place where previous arrangements have not been made by the operator, 
when the pilot is authorized to so act for the operator;
    (i) Procedures for the release for, or continuation of, flight if 
any item of equipment required for the particular type of operation 
becomes inoperative or unserviceable en route;
    (j) Procedures for refueling airplanes, eliminating fuel 
contamination, protecting from fire (including electrostatic 
protection), and supervising and protecting passengers during refueling;
    (k) Procedures to be followed by the pilot in command in the 
briefing under Sec. 125.327;
    (l) Flight locating procedures, when applicable;
    (m) Procedures for ensuring compliance with emergency procedures, 
including a list of the functions assigned each category of required 
crewmembers in connection with an emergency and emergency evacuation;
    (n) The approved airplane inspection program;
    (o) Procedures and instructions to enable personnel to recognize 
hazardous materials, as defined in title 49 CFR, and if these materials 
are to be carried, stored, or handled, procedures and instructions for--
    (1) Accepting shipment of hazardous material required by title 49 
CFR, to assure proper packaging, marking, labeling, shipping documents, 
compatibility of articles, and instructions on their loading, storage, 
and handling;
    (2) Notification and reporting hazardous material incidents as 
required by title 49 CFR; and
    (3) Notification of the pilot in command when there are hazardous 
materials aboard, as required by title 49 CFR;
    (p) Procedures for the evacuation of persons who may need the 
assistance of another person to move expeditiously to an exit if an 
emergency occurs;
    (q) The identity of each person who will administer tests required 
by this part, including the designation of the tests authorized to be 
given by the person; and
    (r) Other procedures and policy instructions regarding the 
certificate holder's operations that are issued by the certificate 
holder.