[Code of Federal Regulations]
[Title 16, Volume 1]
[Revised as of January 1, 2005]
From the U.S. Government Printing Office via GPO Access
[CITE: 16CFR303.24]

[Page 233-234]
 
                     TITLE 16--COMMERCIAL PRACTICES
 
                   CHAPTER I--FEDERAL TRADE COMMISSION
 
PART 303_RULES AND REGULATIONS UNDER THE TEXTILE FIBER PRODUCTS 
IDENTIFICATION ACT--Table of Contents
 
Sec. 303.24  Pile fabrics and products composed thereof.

    The fiber content of pile fabrics or products composed thereof may 
be stated on the label in such segregated form as will show the fiber 
content of the face or pile and of the back or base, with percentages of 
the respective fibers as they exist in the face or pile and in the back 
or base: Provided, That

[[Page 234]]

in such disclosure the respective percentages of the face and back be 
given in such manner as will show the ratio between the face and the 
back. Examples of the form of marking pile fabric as to fiber content 
provided for in this section are as follows:

100% Nylon Pile
100% Cotton Back
(Back constitutes 60% of fabric and pile 40%).
Face--60% Rayon, 40% Nylon
Back--70% Cotton, 30% Rayon
(Face constitutes 60% of fabric and back 40%).