[Code of Federal Regulations]
[Title 16, Volume 1]
[Revised as of January 1, 2005]
From the U.S. Government Printing Office via GPO Access
[CITE: 16CFR303.29]

[Page 234-235]
 
                     TITLE 16--COMMERCIAL PRACTICES
 
                   CHAPTER I--FEDERAL TRADE COMMISSION
 
PART 303_RULES AND REGULATIONS UNDER THE TEXTILE FIBER PRODUCTS 
IDENTIFICATION ACT--Table of Contents
 
Sec. 303.29  Labeling of pairs or products containing two or more units.

    (a) Where a textile fiber product consists of two or more parts, 
units, or items of different fiber content, a separate label containing 
the required information shall be affixed to each of such parts, units 
or items showing the required information as to such part, unit, or 
item: Provided, That where such parts, units, or items are marketed or 
handled as a single product or ensemble and are sold and delivered to 
the ultimate consumer as a single

[[Page 235]]

product or ensemble, the required information may be set out on a single 
label in such a manner as to separately show the fiber composition of 
each part, unit, or item.
    (b) Where garments, wearing apparel, or other textile fiber products 
are marketed or handled in pairs or ensembles of the same fiber content, 
only one unit of the pair or ensemble need be labeled with the required 
information when sold and delivered to the ultimate consumer.

[24 FR 4480, June 2, 1959, as amended at 25 FR 4318, May 14, 1960]