[Code of Federal Regulations]
[Title 33, Volume 2]
[Revised as of July 1, 2005]
From the U.S. Government Printing Office via GPO Access
[CITE: 33CFR155.140]

[Page 390-391]
 
                TITLE 33--NAVIGATION AND NAVIGABLE WATERS
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 155_OIL OR HAZARDOUS MATERIAL POLLUTION PREVENTION REGULATIONS 
FOR VESSELS--Table of Contents
 
                            Subpart A_General
 
Sec. 155.140  Incorporation by reference.

    (a) Certain material is incorporated by reference into this part 
with the approval of the Director of the Federal Register under 5 U.S.C. 
552(a) and 1 CFR part 51. To enforce any edition other than that 
specified in paragraph (b) of this section, the Coast Guard must publish 
notice of change in the Federal Register and the material must be 
available to the public. All approved material is available for 
inspection at the U.S. Coast Guard Office of Compliance (G-MOC), 2100 
Second Street SW., Washington, 20593-0001, and at the National Archives 
and Records Administration (NARA). For information on the availability 
of this material at NARA, call 202-741-6030, or go to: http://
www.archives.gov/federal--register/code--of--federal--regulations/ibr--
locations.html. All approved material is available from the sources 
indicated in paragraph (b) of this section.
    (b) The material approved for incorporation by reference in this 
part, and the sections affected, are as follows:

American National Standards Institute, Inc. (ANSI) 11 West 42nd Street, 
New York, NY 10036

[[Page 391]]



ANSI A10.14--Requirements for Safety       155.230
 Belts, Harnesses, Lanyards and Lifelines
 for Construction and Demolition Use,
 1991.


American Society for Testing and Materials (ASTM) 100 Barr Harbor Drive, 
West Conshohocken, PA 19428-2959

ASTM F 631-93, Standard Guide for          Appendix B.
 Collecting Skimmer Performance Data in
 Controlled Environments.
ASTM F 715-95, Standard Test Methods for   Appendix B.
 Coated Fabrics Used for Oil Spill
 Control and Storage.
ASTM F 722-82 (1993), Standard             Appendix A; Appendix B.
 Specification for Welded Joints for
 Shipboard Piping Systems.


International Maritime Organization (IMO)Publications Section, 4 Albert 
Embankment, London SE1 75R, United Kingdom, Telex 23588.

Resolution A.535(13), Recommendations on   155.235
 Emergency Towing Requirements for
 Tankers, November 17, 1983.
Resolution MSC.35(63), Adoption of         155.235
 Guidelines for Emergency Towing
 Arrangement on Tankers, May 20, 1994.


Oil Companies International Marine Forum (OCIMF) 15th Floor, 96 Victoria 
Street, London SW1E 5JW England.

Ship to Ship Transfer Guide (Petroleum),   155.1035
 Second Edition, 1988.



[CGD 91-034, 58 FR 7424, Feb. 5, 1993, as amended by CGD 90-068, 58 FR 
67995, Dec. 22, 1993; CGD 96-026, 61 FR 33666, June 28, 1996; CGD 95-
028, 62 FR 51194, Sept. 30, 1997; USCG-1998-4443, 63 FR 71763, Dec. 30, 
1998; USCG-1999-5151, 64 FR 67176, Dec. 1, 1999; 69 FR 18803, Apr. 9, 
2004]