[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2005] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR437.14] [Page 366] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 437_THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY--Table of Contents Subpart A_Metals Treatment and Recovery Sec. 437.14 New source performance standards (NSPS). (a) Except as provided in Sec. 437.10(b), any new source subject to this subpart must achieve the following performance standards: Performance Standards ------------------------------------------------------------------------ Maximum Regulated parameter Maximum monthly avg. daily 1 1 ------------------------------------------------------------------------ Contentional Parameters ------------------------------------------------------------------------ O&G......................................... 205 50.2 pH.......................................... (\2\) (\2\) TSS......................................... 29.6 11.3 --------------------------------------------- Metal Parameters ------------------------------------------------------------------------ Antimony.................................... 0.111 0.0312 Arsenic..................................... 0.0993 0.0199 Cadmium..................................... 0.782 0.163 Chromium.................................... 0.167 0.0522 Cobalt...................................... 0.182 0.0703 Copper...................................... 0.659 0.216 Lead........................................ 1.32 0.283 Mercury..................................... 0.000641 0.000246 Nickel...................................... 0.794 0.309 Selenium.................................... 0.176 0.0698 Silver...................................... 0.0318 0.0122 Tin......................................... 0.0955 0.0367 Titanium.................................... 0.0159 0.00612 Vanadium.................................... 0.0628 0.0518 Zinc........................................ 0.657 0.252 ------------------------------------------------------------------------ 1 mg/L (ppm). \2\ Within the range 6 to 9. (b) In-plant standards for cyanide are the same as the limitations specified in Sec. 437.11(b).