[Code of Federal Regulations]

[Title 40, Volume 29]

[Revised as of July 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR463.10]



[Page 548]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 463_PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY--Table 

of Contents

 

         Subpart A_Contact Cooling and Heating Water Subcategory

 

Sec. 463.10  Applicability; description of the contact cooling and 

heating water subcategory.





    This subpart applies to discharges of pollutants from processes in 

the contact cooling and heating water subcategory to waters of the 

United States and the introduction of such pollutants into publicly 

owned treatment works. Processes in the contact cooling and heating 

water subcategory are processes where process water comes in contact 

with plastic materials or plastic products for the purpose of heat 

transfer during plastics molding and forming.