[Code of Federal Regulations]

[Title 40, Volume 29]

[Revised as of July 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR463.13]



[Page 549]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 463_PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY--Table 

of Contents

 

         Subpart A_Contact Cooling and Heating Water Subcategory

 

Sec. 463.13  Effluent limitations guidelines representing the degree of 



effluent reduction attainable by the application of the best available 

technology 

          economically achievable.



    (a) The BAT effluent limitations guidelines for bis(2-ethylhexyl) 

phthalate are reserved.

    (b) The Agency has determined that, with the exception of bis(2-

ethylhexyl) phthalate, there are no toxic pollutants in treatable 

concentrations in contact cooling and heating water. Accordingly, the 

Agency is promulgating BAT effluent limitations guidelines equal to the 

BPT effluent limitations guidelines.