[Code of Federal Regulations]

[Title 40, Volume 29]

[Revised as of July 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR463.14]



[Page 549]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 463_PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY--Table 

of Contents

 

         Subpart A_Contact Cooling and Heating Water Subcategory

 

Sec. 463.14  New source performance standards.



    (a) NSPS for bis(2-ethylhexyl) phthalate are reserved.

    (b) Any new source subject to this subpart must achieve performance 

standards (i.e., mass of pollutant discharged), which are calculated by 

multiplying the average process water usage flow rate for the contact 

cooling and heating water processes at a new source times the following 

pollutant concentrations:



                                Subpart A

                   [Contact cooling and heating water]

------------------------------------------------------------------------

                  Concentration used to calculate NSPS

-------------------------------------------------------------------------

                                                             Maximum for

              Pollutant or pollutant property                 any 1 day

                                                                (mg/l)

------------------------------------------------------------------------

BOD5.......................................................           26

Oil and grease.............................................           29

TSS........................................................           19

pH.........................................................        (\1\)

------------------------------------------------------------------------

\1\ Within the range of 6.0 to 9.0 at all times.





The permit authority will obtain the average process water usage flow 

rate for the new source contact cooling and heating water processes from 

the permittee.