[Code of Federal Regulations]

[Title 40, Volume 29]

[Revised as of July 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR463.23]



[Page 550]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 463_PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY--Table 

of Contents

 

                  Subpart B_Cleaning Water Subcategory

 

Sec. 463.23  Effluent limitations guidelines representing the degree 



of effluent reduction attainable by the application of the best 

available technology 

          economically achievable.



    The Agency has determined that there are insignificant quantities of 

toxic pollutants in cleaning process wastewaters after compliance with 

applicable BPT effluent limitations guidelines. Accordingly, because the 

BPT level of treatment provides adequate control, the Agency is 

establishing BAT effluent limitations guidelines equal to the BPT 

effluent limitations guidelines.