[Code of Federal Regulations]

[Title 40, Volume 29]

[Revised as of July 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR463.3]



[Page 548]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 463_PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY--Table 

of Contents

 

Sec. 463.3  Monitoring and reporting requirements.



    The ``monthly average'' regulatory values shall be the basis for the 

monthly average effluent limitations guidelines and standards in direct 

discharge permits. Compliance with the monthly average effluent 

limitations guidelines and standards is required regardless of the 

number of samples analyzed and averaged.