[Code of Federal Regulations]

[Title 40, Volume 29]

[Revised as of July 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR463.30]



[Page 551]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 463_PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY--Table 

of Contents

 

                  Subpart C_Finishing Water Subcategory

 

Sec. 463.30  Applicability; description of the finishing water 

subcategory.





    This subpart applies to discharges of pollutants from processes in 

the finishing water subcategory to waters of the United States and the 

introduction of such pollutants into publicly owned treatment works. 

Processes in the finishing water subcategory are processes where water 

comes in contact with the plastic product during finishing.