[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2005] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR467.01] [Page 615-617] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 467_ALUMINUM FORMING POINT SOURCE CATEGORY--Table of Contents Sec. 467.01 Applicability. General Provisions Sec. 467.01 Applicability. 467.02 General definitions. 467.03 Monitoring and reporting requirements. 467.04 Compliance date for PSES. 467.05 Removal allowances for pretreatment standards. Subpart A_Rolling With Neat Oils Subcategory 467.10 Applicability; description of the rolling with neat oils subcategory. 467.11 Specialized definitions. 467.12 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 467.13 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 467.14 New source performance standards. 467.15 Pretreatment standards for existing sources. 467.16 Pretreatment standards for new sources. 467.17 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] [[Page 616]] Subpart B_Rolling With Emulsions Subcategory 467.20 Applicability; description of the rolling with emulsions subcategory. 467.21 Specialized definitions. 467.22 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 467.23 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 467.24 New source performance standards. 467.25 Pretreatment standards for existing sources. 467.26 Pretreatment standards for new sources. 467.27 Effluent limitations representing the degree of effluent reduction attainable by the applicaton of the best conventional pollutant control technology. [Reserved] Subpart C_Extrusion Subcategory 467.30 Applicability; description of the extrusion subcategory. 467.31 Specialized definitions. 467.32 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 467.33 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 467.34 New source performance standards. 467.35 Pretreatment standards for existing sources. 467.36 Pretreatment standards for new sources. 467.37 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Subpart D_Forging Subcategory 467.40 Applicability; description of forging subcategory. 467.41 Specialized definitions. 467.42 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. [Reserved] 467.43 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. [Reserved] 467.44 New source performance standards. 467.45 Pretreatment standards for existing sources. 467.46 Pretreatment standards for new sources. 467.47 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Subpart E_Drawing With Neat Oils Subcategory 467.50 Applicability; description of the drawing with neat oils subcategory. 467.51 Specialized definitions. 467.52 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 467.53 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 467.54 New source performance standards. 467.55 Pretreatment standards for existing sources. 467.56 Pretreatment standards for new sources. 467.57 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Subpart F_Drawing With Emulsions or Soaps Subcategory 467.60 Applicability; description of the drawing with emulsions or soaps subcategory. 467.61 Specialized definitions. 467.62 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. 467.63 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. 467.64 New source performance standards. 467.65 Pretreatment standards for existing sources. 467.66 Pretreatment standards for new sources. 467.67 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved] Authority: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the ``Act''); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; [[Page 617]] 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4. Source: 48 FR 49149, Oct. 24, 1983, unless otherwise noted. General Provisions (a) Aluminum forming includes commonly recognized forming operations such as rolling, drawing, extruding, and forging and related operations such as heat treatment, casting, and surface treatments. Surface treatment of aluminum is any chemical or electrochemical treatment applied to the surface of aluminum. Such surface treatment is considered to be a part of aluminum forming whenever it is performed as an integral part of aluminum forming. For the purposes of this regulation, surface treatment of aluminum is considered to be an integral part of aluminum forming whenever it is performed at the same plant site at which aluminum is formed and such operations are not considered for regulation under the Electroplating and Metal Finishing provisions of 40 CFR parts 413 and 433. Casting aluminum when performed as an integral part of aluminum forming and located on-site at an aluminum forming plant is considered an aluminum forming operation and is covered under these guidelines. When aluminum forming is performed on the same site as primary aluminum reduction the casting shall be regulated by the nonferrous metals guidelines if there is no cooling of the aluminum prior to casting. If the aluminum is cooled prior to casting then the casting shall be regulated by the aluminum forming guidelines. (b) This part applies to any aluminum forming facility, except for plants identified under paragraph (c) of this section, which discharges or may discharge pollutants to waters of the United States or which introduces or may introduce pollutants into a publicly owned treatment works. (c) This part is applicable to indirect discharging aluminum forming plants that extrude less than 3 million pounds of product per year and draw, with emulsions or soaps, less than 1 million pounds per year. Note: This paragraph is promulgated as an Interim Final Rule. [48 FR 49149, Oct. 24, 1983; 49 FR 11631, Mar. 27, 1984]