[Code of Federal Regulations]

[Title 40, Volume 13]

[Revised as of July 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR63.6635]



[Page 20-21]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 63_NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR 

SOURCE CATEGORIES--Table of Contents

 

 Subpart ZZZZ_National Emissions Standards for Hazardous Air Pollutants 

        for Stationary Reciprocating Internal Combustion Engines

 

Sec. 63.6635  How do I monitor and collect data to demonstrate continuous 

compliance?



    (a) If you must comply with emission and operating limitations, you 

must



[[Page 21]]



monitor and collect data according to this section.

    (b) Except for monitor malfunctions, associated repairs, and 

required quality assurance or control activities (including, as 

applicable, calibration checks and required zero and span adjustments), 

you must monitor continuously at all times that the stationary RICE is 

operating.

    (c) You may not use data recorded during monitoring malfunctions, 

associated repairs, and required quality assurance or control activities 

in data averages and calculations used to report emission or operating 

levels. You must, however, use all the valid data collected during all 

other periods.