[Code of Federal Regulations]
[Title 40, Volume 30]
[Revised as of July 1, 2005]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR761.210]

[Page 704-705]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 761_POLYCHLORINATED BI PHENYLS (PCBs) MANUFACTURING, PROCESSING, 
DISTRIBUTION IN COMMERCE, AND USE PROHIBITIONS--Table of Contents
 
            Subpart K_PCB Waste Disposal Records and Reports
 
Sec. 761.210  Manifest discrepancies.

    (a) Manifest discrepancies are differences between the quantity or 
type of PCB waste designated on the manifest or shipping paper and the 
quantity or type of PCB waste actually delivered to and received by a 
designated facility.
    (1) Significant discrepancies in quantity are:
    (i) Variations greater than 10 percent in weight of PCB waste in 
containers.
    (ii) Any variation in piece count, such as a discrepancy of one PCB 
Transformer or PCB Container or PCB Article Container in a truckload.
    (2) Significant discrepancies in type of PCB waste are obvious 
differences which may be discovered by inspection or waste analysis, 
such as the substitution of solids for liquids or the substitution of 
high concentration PCBs (above 500 ppm) with lower concentration 
materials.
    (b) Upon discovering a significant discrepancy, the owner or 
operator of the designated commercial storage or disposal facility shall 
attempt to reconcile the discrepancy with the waste generator or 
transporter. If the discrepancy is not resolved within 15 days after 
receiving the PCB waste, such owner or operator shall immediately submit 
to the Regional Administrator for the Region in which the designated 
facility is located a letter describing

[[Page 705]]

the discrepancy and attempts to reconcile it, and a copy of the manifest 
or shipping paper at issue.

[54 FR 52752, Dec. 21, 1989, as amended at 58 FR 34205, June 23, 1993]