[Code of Federal Regulations]

[Title 47, Volume 1]

[Revised as of October 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 47CFR18.209]



[Page 874-875]

 

                       TITLE 47--TELECOMMUNICATION

 

              CHAPTER I--FEDERAL COMMUNICATIONS COMMISSION

 

PART 18_INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT--Table of Contents

 

                Subpart B_Applications and Authorizations

 

Sec. 18.209  Identification of authorized equipment.



    (a) Each device for which a grant of equipment authorization is 

issued under this part shall be identified pursuant to the applicable 

provisions of subpart J of part 2 of this chapter. Changes in the 

identification of authorized equipment may be made pursuant to Sec. 

2.933 of part 2 of this chapter. FCC Identifiers as described in 

Sec. Sec. 2.925 and 2.926 of this chapter shall not be used on 

equipment subject to verification or Declaration of Conformity.

    (b) Devices authorized under the Declaration of Conformity procedure 

shall be labelled with the logo shown below. The label shall not be a 

stick-on, paper



[[Page 875]]



label. It shall be permanently affixed to the product and shall be 

readily visible to the purchaser at the time of purchase, as described 

in Sec. 2.925(d) of this chapter. Permanently affixed means that the 

label is etched, engraved, stamped, silkscreened, indelibly printed, or 

otherwise permanently marked on a permanently attached part of the 

equipment or on a nameplate of metal, plastic, or other material 

fastened to the equipment by welding, riveting, or a permanent adhesive. 

The label must be designed to last the expected lifetime of the 

equipment in the environment in which the equipment may be operated and 

must not be readily detachable. The logo follows:

[GRAPHIC] [TIFF OMITTED] TR07JY98.027





[63 FR 36603, July 7, 1998]