[Code of Federal Regulations]

[Title 48, Volume 7]

[Revised as of October 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 48CFR2901.105-2]



[Page 5-6]

 

            TITLE 48--FEDERAL ACQUISITION REGULATIONS SYSTEM

 

                     CHAPTER 29--DEPARTMENT OF LABOR

 

PART 2901_DEPARTMENT OF LABOR ACQUISITION REGULATION SYSTEM--Table of 

Contents

 

               Subpart 2901.1_Purpose, Authority, Issuance

 

Sec. 2901.105-2  Arrangement of regulations.



    (a) Numbering. Where DOLAR implements the FAR, the implementing 

part, subpart, section or subsection of the DOLAR is numbered and 

captioned, to the extent feasible, the same as the FAR part, subpart, 

section or subsection being implemented, except that



[[Page 6]]



the section or subsection being implemented is preceded with a 29 or a 

290 such that there will always be four numbers to the left of the first 

decimal. For example, the DOLAR implementation of FAR l.105-l is shown 

as 290l.105-1 and the DOLAR implementation of FAR subpart 24.1 is shown 

as DOLAR subpart 2924.1. Material which supplements the FAR is assigned 

the subsection numbers 70 and up. For example, the DOL regulation 

governing appointment and termination of contracting officers' technical 

representatives is identified as 2901.603-71.

    (b) References to FAR materials within the DOLAR will include the 

acronym FAR and the identifying number, for example, FAR l.104-2(c)(2). 

References to DOLAR materials within the DOLAR simply cite the 

identifying number, for example, 2901.104-2(c)(2).