[Code of Federal Regulations]

[Title 49, Volume 2]

[Revised as of October 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 49CFR172.420]



[Page 382]

 

                        TITLE 49--TRANSPORTATION

 

   CHAPTER I--PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, 

                      DEPARTMENT OF TRANSPORTATION

 

PART 172_HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS 

MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, AND TRAINING 

REQUIREMENTS--Table of Contents

 

                           Subpart E_Labeling

 

Sec. 172.420  FLAMMABLE SOLID label.



    (a) Except for size and color, the FLAMMABLE SOLID label must be as 

follows:

[GRAPHIC] [TIFF OMITTED] TC02MR91.024



    (b) In addition to complying with Sec. 172.407, the background on 

the FLAMMABLE SOLID label must be white with vertical red stripes 

equally spaced on each side of a red stripe placed in the center of the 

label. The red vertical stripes must be spaced so that, visually, they 

appear equal in width to the white spaces between them. The symbol 

(flame) and text (when used) must be overprinted. The text ``FLAMMABLE 

SOLID'' may be placed in a white rectangle.



[Amdt. 172-123, 56 FR 66257, Dec. 20, 1991]