[Code of Federal Regulations]

[Title 49, Volume 2]

[Revised as of October 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 49CFR179.100-9]



[Page 1038]

 

                        TITLE 49--TRANSPORTATION

 

   CHAPTER I--PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, 

                      DEPARTMENT OF TRANSPORTATION

 

PART 179_SPECIFICATIONS FOR TANK CARS--Table of Contents

 

 Subpart C_Specifications for Pressure Tank Car Tanks (Classes DOT-105, 

                         109, 112, 114 and 120)

 

Sec. 179.100-9  Welding.



    (a) All joints shall be fusion-welded in compliance with the 

requirements of AAR Specifications for Tank Cars, appendix W (IBR, see 

Sec. 171.7 of this subchapter). Welding procedures, welders and 

fabricators shall be approved.

    (b) [Reserved]



[29 FR 18995, Dec. 29, 1964, as amended at 65 FR 58632, Sept. 29, 2000; 

68 FR 75759, Dec. 31, 2003]