[Code of Federal Regulations]

[Title 49, Volume 4]

[Revised as of October 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 49CFR230.30]



[Page 425]

 

                        TITLE 49--TRANSPORTATION

 

       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 

                             TRANSPORTATION

 

PART 230_STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS--Table 

of Contents

 

                   Subpart B_Boilers and Appurtenances

 

Sec. 230.30  Lap-joint seam boilers.



    Every boiler having lap-joint longitudinal seams without reinforcing 

plates shall have sufficient lagging, jacketing, flues, and tubes 

removed at every annual inspection so that an inspection of the entire 

joint, inside and out, can be made, taking special care to detect 

grooving or cracks at the edges of the seams.