[Code of Federal Regulations]

[Title 49, Volume 4]

[Revised as of October 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 49CFR235.12]



[Page 582-583]

 

                        TITLE 49--TRANSPORTATION

 

       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 

                             TRANSPORTATION

 

PART 235_INSTRUCTIONS GOVERNING APPLICATIONS FOR APPROVAL OF A 

DISCONTINUANCE OR MATERIAL MODIFICATION OF A SIGNAL SYSTEM OR 

RELIEF FROM THE REQUIREMENTS OF PART 236--Table of Contents

 

Sec. 235.12  Additional required information-prints.



    (a) A print or prints, size 8 inches by 10\1/2\ inches, or 8\1/2\ 

inches by 11 inches, or folded to 8 inches by 10\1/2\ inches or to 8\1/

2\ inches by 11 inches, shall be furnished with each application.

    (b) The print or prints shall be to scale or by indicated 

dimensions, using



[[Page 583]]



Association of American Railroads graphic symbols.

    (c) The following information shall be shown on the print or prints:

    (1) Present and proposed arrangement of tracks and signal 

facilities;

    (2) Name of carrier;

    (3) Operating division;

    (4) Place and State; and

    (5) Timetable directions of movements.

    (d) If stopping distances are involved, the following information 

shall also be shown:

    (1) Curvature and grade;

    (2) Maximum authorized speeds of trains; and

    (3) Length of signal control circuits for each signal indication 

displayed.

    (e) The following color scheme is suggested on prints:

    (1) Installations, relocations, and added signal aspects should be 

colored, preferably in yellow;

    (2) Removals, discontinuances, and abandonments should be colored, 

preferably in red; and

    (3) Existing facilities not pertinent to change proposed in 

application should be shown uncolored.



(Approved by the Office of Management and Budget under control number 

2130-0042)