[Code of Federal Regulations]

[Title 19, Volume 1]

[Revised as of April 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 19CFR10.58]



[Page 122]

 

                        TITLE 19--CUSTOMS DUTIES

 

   CHAPTER I--BUREAU OF CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF 

              HOMELAND SECURITY; DEPARTMENT OF THE TREASURY

 

PART 10_ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC.

--Table of Contents

 

                      Subpart A_General Provisions

 

Sec.  10.58  Bolting cloths; marking.



    (a) As a prerequisite to the free entry of bolting cloth for milling 

purposes under subheading 5911.20.20, Harmonized Tariff Schedule of the 

United States, the cloth shall be indelibly marked from selvage to 

selvage at intervals of not more then 10.16 centimeters with ``bolting 

cloth expressly for milling purposes'' in block letters 7.62 centimeters 

in height. Bolting cloths composed of silk imported expressly for 

milling purposes shall be considered only such cloths as are suitable 

for and are used in the act or process of grading, screening, bolting, 

separating, classifying, or sifting dry materials, or dry materials 

mixed with water, if the water is merely a carrying medium.

    (b) Bolting cloths not marked in the manner above indicated at the 

time of importation may be so marked by the importers in public stores 

under the supervision of customs officers.



[28 FR 14663, Dec. 31, 1963, as amended by T.D. 87-75, 52 FR 20066, May 

29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]



            Withdrawal of Supplies and Equipment for Vessels