[Code of Federal Regulations]

[Title 19, Volume 1]

[Revised as of April 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 19CFR115.29]



[Page 573]

 

                        TITLE 19--CUSTOMS DUTIES

 

   CHAPTER I--BUREAU OF CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF 

              HOMELAND SECURITY; DEPARTMENT OF THE TREASURY

 

PART 115_CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO 

INTERNATIONAL CUSTOMS CONVENTIONS--Table of Contents

 

     Subpart C_Procedures for Approval of Containers by Design Type

 

Sec.  115.29  Plan review.



    (a) A manufacturer or owner who wants containers to be approved by 

design type must submit the plans and specifications for the container 

to the Certifying Authority.

    (b) The Certifying Authority examining the plans and specifications 

submitted in accordance with paragraph (a) of this section shall:

    (1) Approve the plans and specifications in accordance with the 

requirements of Sec.  115.30 and arrange to inspect a container in 

accordance with Sec.  115.31; or

    (2) Advise the applicant of any necessary changes to be made for 

compliance with the requirements of Sec.  115.30.

    (c) If changes in the design of the container are made during 

production but after approval of the plans and specifications by the 

Certifying Authority and furnish it with ``as-built'' drawings of the 

container so that the plans can be reviewed and one or more containers 

inspected during the production stage to confirm that they continue to 

comply with the requirements of Sec.  115.30.