[Code of Federal Regulations]

[Title 19, Volume 1]

[Revised as of April 1, 2005]

From the U.S. Government Printing Office via GPO Access

[CITE: 19CFR115.64]



[Page 577]

 

                        TITLE 19--CUSTOMS DUTIES

 

   CHAPTER I--BUREAU OF CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF 

              HOMELAND SECURITY; DEPARTMENT OF THE TREASURY

 

PART 115_CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO 

INTERNATIONAL CUSTOMS CONVENTIONS--Table of Contents

 

    Subpart F_Procedures for Approval of Road Vehicles by Design Type

 

Sec.  115.64  Plan review.



    (a) A manufacturer or owner who wants road vehicles to be approved 

by design type must submit the plans and specifications of the road 

vehicles to the Certifying Authority.

    (b) The Certifying Authority that examines the plans and 

specifications submitted in accordance with paragraph (a) of this 

section shall:

    (1) Approve the plans and specifications in accordance with the 

requirements of Sec.  115.65 and arrange to inspect a road vehicle in 

accordance with Sec.  115.66; or

    (2) Advise the applicant of any necessary changes to be made for 

compliance with the requirements of Sec.  115.65.

    (c) If changes in design of the road vehicle are made during 

production but after approval of the plans and specifications by the 

Certifying Authority, the manufacturer shall immediately notify the 

Certifying Authority and furnish it with ``as-built'' drawings of the 

road vehicle so that the plans can be reviewed and one or more road 

vehicles inspected during the production stage to confirm that they 

continue to comply with the requirements of Sec.  115.65.