[Code of Federal Regulations]

[Title 24, Volume 5]

[Revised as of April 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 24CFR3280.6]



[Page 112]

 

                 TITLE 24--HOUSING AND URBAN DEVELOPMENT

 

 CHAPTER XX--OFFICE OF ASSISTANT SECRETARY FOR HOUSING--FEDERAL HOUSING 

        COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT

 

PART 3280_MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS--Table 

of Contents

 

                            Subpart A_General

 

Sec.  3280.6  Serial number.



    (a) A manufactured home serial number which will identify the 

manufacturer and the state in which the manufactured home is 

manufactured, must be stamped into the foremost cross member. Letters 

and numbers must be \3/8\ inch minimum in height. Numbers must not be 

stamped into hitch assembly or drawbar.