[Code of Federal Regulations]

[Title 24, Volume 5]

[Revised as of April 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 24CFR3282.205]



[Page 233]

 

                 TITLE 24--HOUSING AND URBAN DEVELOPMENT

 

 CHAPTER XX--OFFICE OF ASSISTANT SECRETARY FOR HOUSING--FEDERAL HOUSING 

        COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT

 

PART 3282_MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS

--Table of Contents

 

    Subpart E_Manufacturer Inspection and Certification Requirements

 

Sec.  3282.205  Certification requirements.



    (a) Every manufacturer shall make a record of the serial number of 

each manufactured home produced, and a duly authorized representative of 

the manufacturer shall certify that each manufactured home has been 

constructed in accordance with the Federal standards. The manufacturer 

shall furnish a copy of that certification to the IPIA for the purpose 

of determining which manufactured homes are subject to the notification 

and correction requirements of subpart I of this part.

    (b) Every manufacturer of manufactured homes shall certify on the 

data plate as set out in Sec.  3280.5 of chapter XX of 24 CFR and Sec.  

3282.362(c)(3) that the manufactured home is designed to comply with the 

Federal manufactured home construction and safety standards in force at 

the time of manufacture in addition to providing other information 

required to be completed on the data plate.

    (c) Every manufacturer of manufactured homes shall furnish to the 

dealer or distributor of each of its manufactured homes a certification 

that such manufactured home, to the best of the manufacturer's knowledge 

and belief, conforms to all applicable Federal construction and safety 

standards. This certification shall be in the form of the label provided 

by the IPIA under Sec.  3282.362(c)(2). The label shall be affixed only 

at the end of the last stage of production of the manufactured home.

    (d) The manufacturer shall apply a label required or allowed by the 

regulations in this part only to a manufactured home that the 

manufacturer knows by its inspections to be in compliance with the 

standards.



[41 FR 19852, May 13, 1976, as amended at 41 FR 24970, June 21, 1976; 61 

FR 10860, Mar. 15, 1996]