[Code of Federal Regulations]

[Title 14, Volume 1]

[Revised as of January 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 14CFR21.73]



[Page 129-130]

 

                     TITLE 14--AERONAUTICS AND SPACE

 

CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION

 

PART 21_CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS--Table of Contents

 

                 Subpart C_Provisional Type Certificates

 

Sec. 21.73  Eligibility.



    (a) Any manufacturer of aircraft manufactured within the United 

States who is a United States citizen may apply for Class I or Class II 

provisional type certificates, for amendments to provisional type 

certificates held by him, and for provisional amendments to type 

certificates held by him.

    (b) Any manufacturer of aircraft manufactured in a foreign country 

with which the United States has an agreement for the acceptance of 

those aircraft for export and import may apply for a Class II 

provisional type certificate, for amendments to provisional type 

certificates held by him, and for provisional amendments to type 

certificates held by him.

    (c) An aircraft engine manufacturer who is a United States citizen 

and who has altered a type certificated aircraft by installing different 

type certificated aircraft engines manufactured by him within the United 

States may apply for a Class I provisional type certificate



[[Page 130]]



for the aircraft, and for amendments to Class I provisional type 

certificates held by him, if the basic aircraft, before alteration, was 

type certificated in the normal, utility, acrobatic, commuter, or 

transport category.



[Doc. No. 5085, 29 FR 14566, Oct. 24, 1964, as amended by Amdt. 21-12, 

31 FR 13380, Oct. 15, 1966; Amdt. 21-59, 52 FR 1836, Jan. 15, 1987]