[Code of Federal Regulations]

[Title 14, Volume 1]

[Revised as of January 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 14CFR33.5]



[Page 768-769]

 

                     TITLE 14--AERONAUTICS AND SPACE

 

CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION

 

PART 33_AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES--Table of Contents

 

                            Subpart A_General

 

Sec. 33.5  Instruction manual for installing and operating the engine.



    Each applicant must prepare and make available to the Administrator 

prior to the issuance of the type certificate, and to the owner at the 

time of delivery of the engine, approved instructions for installing and 

operating the engine. The instructions must include at least the 

following:

    (a) Installation instructions. (1) The location of engine mounting 

attachments, the method of attaching the engine to the aircraft, and the 

maximum allowable load for the mounting attachments and related 

structure.

    (2) The location and description of engine connections to be 

attached to accessories, pipes, wires, cables, ducts, and cowling.

    (3) An outline drawing of the engine including overall dimensions.

    (b) Operation instructions. (1) The operating limitations 

established by the Administrator.

    (2) The power or thrust ratings and procedures for correcting for 

nonstand ard atmosphere.



[[Page 769]]



    (3) The recommended procedures, under normal and extreme ambient 

conditions for--

    (i) Starting;

    (ii) Operating on the ground; and

    (iii) Operating during flight.



[Amdt. 33-6, 39 FR 35463, Oct. 1, 1974, as amended by Amdt. 33-9, 45 FR 

60181, Sept. 11, 1980]