[Code of Federal Regulations]

[Title 15, Volume 3]

[Revised as of January 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 15CFR1150.3]



[Page 421-422]

 

                  TITLE 15--COMMERCE AND FOREIGN TRADE

 

      CHAPTER XI--TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE

 

PART 1150_MARKING OF TOY, LOOK-ALIKE AND IMITATION FIREARMS--Table of 

Contents

 

Sec. 1150.3  Approved markings.



    The following markings are approved by the Secretary of Commerce:

    (a) A blaze orange (Federal Standard 595a, February, 1987, color 

number 12199, issued by the General Services Administration) or orange 

color brighter than that specified by the federal standard color number, 

solid plug permanently affixed to the muzzle end of the barrel as an 

integral part of the entire device and recessed no more than 6 

millimeters from the muzzle end of the barrel. This incorporation by 

reference was approved by the Director of the Federal Register in 

accordance with U.S.C. 552(a) and 1 CFR part 51. Copies of Federal 

Standard 595a may be obtained from the Office of Engineering and 

Technical Management, Chemical Technology Division, Paints Branch, 

General Services Administration, Washington, DC 20406. Copies may be 

inspected at the office of the Associate Director for Industry and 

Standards, National Institute for Standards and Technology, 

Gaithersburg, Maryland, or at the National Archives and



[[Page 422]]



Records Administration (NARA). For information on the availability of 

this material at NARA, call 202-741-6030, or go to: http://

www.archives.gov/federal--register/code--of--federal--regulations/ibr--

locations.html.

    (b) A blaze orange (Federal Standard 595a, February, 1987, color 

number 12199, issued by the General Services Administration) or orange 

color brighter than that specified by the Federal Standard color number, 

marking permanently affixed to the exterior surface of the barrel, 

covering the circumference of the barrel from the muzzle end for a depth 

of at least 6 millimeters. This incorporation by reference was approved 

by the Director for the Federal Register in accordance with 5 U.S.C. 

552(a) and 1 CFR part 51. Copies of Federal Standard 595a may be 

obtained from the Office of Engineering and Technical Management, 

Chemical Technology Division, Paints Branch, General Services 

Administration, Washington, DC 20406. Copies may be inspected at the 

office of the Associate Director for Industry and Standards, National 

Institute for Standards and Technology, Gaithersburg, Maryland, or at 

the National Archives and Records Administration (NARA). For information 

on the availability of this material at NARA, call 202-741-6030, or go 

to: http://www.archives.gov/federal--register/code--of--federal--

regulations/ibr--locations.html.

    (c) Construction of the device entirely of transparent or 

translucent materials which permits unmistakable observation of the 

device's complete contents.

    (d) Coloration of the entire exterior surface of the device in 

white, bright red, bright orange, bright yellow, bright green, bright 

blue, bright pink, or bright purple, either singly or as the predominant 

color in combination with other colors in any pattern.



[54 FR 19358, May 5, 1989, as amended at 57 FR 48454, Oct. 26, 1992; 69 

FR 18803, Apr. 9, 2004]